Qlight SEBA, Быстрый старт

Страница: 4 / 8

4
Bulb/ Xenon Bulb Replacement Instructions
①
②
①
②
• Please wait at least 30 minutes after turning off the power before
replacing the xenon bulb.
• Please pull out the entire xenon bulb structure
①
to disassemble
while pushing the hook down.
• For xenon bulb assembly, please push down the connector
portion of the xenon bulb structure to the connector pin
location
②
until it makes “clark” sound.
• Please wait at least
1
minute after turning off the power
before replacing the bulb.
• In order to dissemble the bulb, please push down the bulb (
①
)
lightly and screw it counterclockwise.
• In order to put the bulb in to the unit, please place the bulb (
①
)
in the socket(
②
) and screw it clockwise while lightly pushing
down the bulb.
Assemble bulb
Disassemble bulb
Assemble
bulb
Disassemble
bulb
■
Xenon Bulb Replacement Instructions(SEBAS only)
■
Bulb Replacement Instructions(SEBA only)
Installation Environment and Protection Rating
• This product is designed to be explosion proof.
• Please make sure to use the product in an environment that meets the specified explosion proof rating and regulations.
• For further information, please visit our website (www.qlight.com).