2
PCD 50
3-Ø5 HOLES
Ø10 HOLES
• DC/AC type cable specification :
External power line - UL1015 AWG18(0.75sq) x 2C 400mm
• DC type product can be wired regardless of polarity.
• For built-in buzzer type, there is a shared supply line for the buzzer
and lighting element.
Ø83
Ø10 HOLES
PCD 50
S80L
13
3
15
42
84
360°/3-M4 BOLT
DC
AC
Red
Black
White
Black
Power
Power
Fuse
Fuse
Parts Definition/ Installation/ Light Function Selection/ Mounting Hole Specifications
■ Parts Definition/ Installation
■ Light Function Selection
■ Mounting Hole Specifications
Wiring Instructions
Dimensions
(Units : mm)
• Please refer to the chart below to use light function selection
switch(
①
) located inside the product.
• Default function is set at steady LED. Select the desired function
for your application during installation.
▶
L : Steady
▶
LF : Flashing
• Machine holes on the mounting surface referring to the
diagram below.
• First, remove the flange nuts from bolts and place the
product through the mounting surface holes.
• Fasten the flange nuts on the opposite side of the
mounting surface until the product is tightened securely.
Reflector
(Heat resistant ABS)
Lens(AS)
LED unit
Housing(ABS)
Flange nut
Rubber spacer
Flat washer
①