3
Housing (ABS)
Light bulb
LED unit
Reflector
(Heat resistant ABS)
S100M/ S125M
S100MLR/ S125MLR
Parts Definition/ Installation
■
Parts Definition
■
Installation
Bulb Replacement Instructions
• S100M/ S125M series have strong magnets at the base of the
product that allows attachment to any metal surface.
Installation Environment and Protection Rating
• This product is designed for use with protection rating of IP54.
• If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating
indicated(IP54), it may cause malfunction or damage to the product.
• In case of outdoor applications, install the product in the upright position. Do not install the product horizontal or upside-
down positions where water can potentially penetrate into the product and impact it’s operation.
• For further information, please visit our website (www.qlight.com).
Lens(AS)
Magnetic
mounting base
Cigarette
lighter plug
• Please wait at least
1
minute after turning off the power
before
replacing the bulb.
• In order to dissemble the bulb, please push down the bulb(
①
)
lightly and screw it counterclockwise.
• In order to put the bulb in to the unit, please place the bulb(
①
)
in the socket(
②
) and screw it clockwise while lightly pushing
down the bulb.
Assemble
bulb
Disassemble
bulb
①
②
