Qlight QWT, Руководство пользователя

Страница: 4 / 8

4
Replacing/ Rearranging LED Lens Units
1. Remove the head cover
②
by loosening the fixing screw
①
.
2. Remove the LED unit by pulling it
③
upward.
3. Replace or rearrange the LED units.
4. Assemble in the reverse order of removing the LED units, Be
careful not to let the rubber ring
④
fitted on the top of each unit
come off.
①
②
③
④
Parts Definition
Screw(M4×25mm)
Rubber backing
(PVC)
Mounting bracket
(SPCC)
Head cover(ABS)
Lens(PC)
Please ensure the power is off
before replacing or rearranging
the LED units. Please carefully
follow the following instructions.
Installation
• The mounting bracket needs to be installed on the mounting surface before fixing the product body onto the mounting bracket.
• Drill the proper number of mounting holes in accordance with the number of LED lens units, refer to the installation diagrams below.
①
Remove the mounting bracket from the product by removing two M4
screws from the speaker unit.
②
Mount the mounting bracket to the mounting surface.
③
Hook the rear of the head cover to the upper bracket, then push the
body against the mounting bracket.
④
After tightly attaching the product body to the mounting bracket, tighten
the two M4 screws removed in step
①
at the bottom of the speaker unit.
① ②
③ ④
M4-25 BOLT
M4-25 BOLT
41
41
41
41
43
21
41
41
41
43
21
41
41
43
21
41
43
21
43
21
2-Ø4 HOLES
Ø13 CABLE
ENTRY
3-Ø4 HOLES
4-Ø4 HOLES
5-Ø4 HOLES
6-Ø4 HOLES
Ø13 CABLE
ENTRY
Ø13 CABLE
ENTRY
Ø13 CABLE
ENTRY
Ø13 CABLE
ENTRY