Qlight QWH50, Руководство пользователя, Страница: 1 / 12

Model
number
Voltage Current
Sound Pattern and
Volume
Certi-
ficate
Weight
QWH35
Built-in
Sound Type
QWH35SD
MP3 Sound
Type
DC12V-24V Max.0.930A • Bit Input : 5Ch
(SD card Type)
• Binary Input : 31Ch
• Warning Sounds : 115dB
• MP3 Messages : 113dB
DC
only
0.90kg
AC110V-220V Max.0.300A
DC12V-24V Max.0.980A
1.00kg
AC110V-220V Max.0.270A
QWH50
Built-in
Sound Type
QWH50SD
MP3 Sound
Tyope
DC12V-24V Max.3.476A • Bit Input : 5Ch
(SD card Type)
• Binary Input : 31Ch
• Warning Sounds : 123dB
• MP3 Messages : 118dB
2.70kg
AC110V-220V Max.0.455A
DC12V-24V Max.4.312A
2.80kg
AC110V-220V Max.0.529A
1
Wall Mount Alarm Sounder with Special Warning Sound
QWH35/ QWH35SD
QWH50/ QWH50SD
66
-20~+50 -50~+60
115 123 113 118
HORN
QWH50 - 110/220 - LC
[Model number] [Voltage] [Sound selection]
| | |
• QWH35
• QWH35SD
•
QWH50
• QWH50SD
• 12/24
- DC12-DC24V
•
110/220
- AC110-220V
• (Blank)
- Standard type
• LC Type
-Uses external
contact
Thank you for purchasing Qlight’s products. Please read this user manual carefully
prior to installation and operation to ensure safe and correct use.
Ordering Specification
Specifications
QWH35 QWH50 www.qlight.com
Please scan the QR code
for more detailed product
information.
• Protection rating : IP66
• Ambient operating temperature : -50
℃
to +60
℃
(QWH35, QWH50)
-20 ℃ to +50 ℃ (QWH35SD, QWH50SD)
Precautions for Safety
Failure to follow the instructions below may cause a loss of life or serious physical injury.
1. Please remove any objects that can interrupt ventilation around the product.
2. Please turn off the power of the product immediately if it fails to operate properly.
3. Carefully wire the product according to each product’s specification.
4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
5. Do not apply excessive force/impact to the product.
6. Failure to follow any of the instructions above may cause malfunction or damage to the product, fire, and electric shock.
Precautions for Correct Use
Failure to follow the proper instructions may cause damage to property, the product, and or malfunction of
the product that would void the warranty.
1. During wiring or maintenance, please completely turn off the power of the product. (Failure to follow this may lead to an electric shock.)
2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection
ratings indicated for each product. (Failure to follow these instructions may cause a fire to the product, electric shock, physical injury,
malfunction or damage to the product.)
3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to
follow these instructions may lead to fire, electric shock, or product damage.)
4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to fire, electric shock, or product damage.)
5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to
follow this may cause damage to property, fire, electric shock and loss of life.)
■
Warning and Caution