1
Multiple Color LED Steady Signal Light
QMCL
QMCL 60
QMCL 80
QMCL100
QMCL125
• Protection rating : IP65
• Ambient operating temperature : -30°C to +50°C
• Buzzer layer current
Model
number
Voltage
Current
Certificate
Weight
Color
QMCL60
DC12V
0.120A
0.12kg
7Color
DC24V
0.060A
QMCL80
DC12V
0.120A
0.17kg
DC24V
0.060A
QMCL100
DC12V
0.240A
0.24kg
DC24V
0.120A
QMCL125
DC12V
0.240A
0.31kg
DC24V
0.120A
Model number
Voltage
AC/DC12V
AC/DC24V
QMCL60
QMCL80
Signal line current
0.120A
0.060A
Buzzer layer current
0.020A
0.020A
QMCL100
QMCL125
Signal line current
0.240A
0.120A
Buzzer layer current
0.020A
0.020A
QMCL80
-
BZ
-
24
[Model number]
[Buzzer]
[Voltage]
|
|
|
•
QMCL60
•
QMCL80
•
QMCL100
•
QMCL125
• (Blank)
- No buzzer type
• BZ
- Built-in buzzer type
•
12-DC12V
•
24-DC24V
65
50
30
80dB
Please scan the QR code for more detailed product information.
www.qlight.com
Ordering Specifications
Product Specifications
Thank you for purchasing Qlight’s products. Please read this user manual carefully
prior to installation and operation to ensure safe and correct use.
Precautions for Safety
Failure to follow the instructions below may cause a loss of life or serious physical injury.
1. Please remove any objects that can interrupt ventilation around the product.
2. Please turn off the power of the product immediately if it fails to operate properly.
3. Carefully wire the product according to each product’s specification.
4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
5. Do not apply excessive force/impact to the product.
6. Failure to follow any of the instructions above may cause malfunction or damage to the product, fire, and electric shock.
Precautions for Correct Use
Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the
product that would void the warranty.
1. During wiring or maintenance, please completely turn off the power of the product. (Failure to follow this may lead to an electric shock.)
2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection
ratings indicated for each product. (Failure to follow these instructions may cause a fire to the product, electric shock, physical injury,
malfunction or damage to the product.)
3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to
follow these instructions may lead to fire, electric shock, or product damage.)
4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to fire, electric shock, or product damage.)
5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to
follow this may cause damage to property, fire, electric shock and loss of life.)
All manuals and user guides at all-guides.com
all-guides.com
