Qlight QLV-1250-SET, Руководство пользователя

Страница: 4 / 8

4
Mounting Hole Specifications
Bracket Adjustment
• Machine holes on the mounting surface referring to the diagram below.
• To adjust the bracket location, please first remove the nuts(M8) that fasten the product and move the brackets to the desired location.
• After properly aligning the brackets to the desired pitch circular diameter (PCD) locations on the mounting surface, fasten the nuts
until they tighten securely.
MODEL A
QLV-1250 900-1200
QLV-1150 800-1100
QLV-885 550-850
Parts Definition/ Installation
• First, machine taps or holes on the mounting surface.
• The mounting hole of this product is 9mm(QLV), 7mm(SAMP-100) and 12mm(SM-100ND) in diameter(long hole).
• Insert the bolt through the hole of the product, and tighten the nut from the opposite side of the mounting surface.
• Please fasten the nuts until the bolts are tightened securely.
• Use a flat washer and spring washer in the bolt assembly if the product will experience severe vibration and shock.
Lens(PC)
Bolt
Cover(AL)
Packing
Nut
Bracket(STS)
QLV-SET
2-Ø8 SLOT HOLES 2-Ø13 HOLES
18
123
110
4-Ø10 HOLES
A
13
7
QLV
SM-100ND
SAMP-100