Qlight QEAL1, Инструкция по эксплуатации

Страница: 3 / 8

3
Dimensions
• Please use an M4 bolt at the location marked in the diagram
above to ground the product.
• When connecting the grounding cable, please use a ring terminal.
• Please use a ring terminal made of C5212 material as it has the
same electrical properties of the conductor.
• Please use a grounding cable with a diameter greater than 4mm.
(Units : mm)
Ø152
Ø7
9
4-Ø8 FITTING HOLES
CABLE ENTRY
NPT 1/2''
37
182.5
23
8
10
0
49
107
78
11
4
114
QEAL1
M4 ground
contact part
• First, machine taps or holes on the mounting surface
①
.
• The mounting hole of this product is 8mm in diameter(hole).
• When machining taps, fasten the bolt through the mounting hole of the product.
• When machining holes, insert the bolt through the hole of the product, and tighten the nut from the opposite side of the mounting surface.
■
Installation
Parts Definition/ Installation/ Grounding Instructions
■
Parts Definition
■
Grounding Instructions
Protection cage : STS316L
Lens(Tempered glass)
Housing(AI)
Bracket(STS)
①
①