Homepage:
www.qleen.de
Phone:
+49 (0)3981 48850
E-Mail:
Karlhans Lehmann KG, Kranichstraße 2a, DE -17235 Neustrelitz
4.1
The dosing quantity is adjusted with the
dosing pump regulator (Fig. 2)
4.2
The total amount of the cleaning solution can be adjusted with the
water flow regulator (Fig. 1)
, if the total
amount is decreased, the concentration of the solution is increased
5. Cleaning with tap water
5.1
Press the button
(
off
/
green
green
⇒
turquoise
turquoise
) for 2 seconds, only tap water comes through the blue hose
5.2
To switch to pure water, press the key
(
off
/
turquoise
turquoise
⇒
green
green
) again for 2 seconds
5.3
Press the key
(
off
/
green
green
⇒
turquoise
turquoise
) for 2 seconds, the dosing pump is switched off and only
tap water comes through the black hose
5.4
To switch on the dosing pump again, press the key
(
off
/
turquoise
turquoise
⇒
green
green
) for 2 seconds
6. Control of the ROTAQLEEN
6.1
The ROTAQLEEN starts automatically in forward operation or last selected direction, if pure/line water
and/or cleaning solution/line water is switched on
6.2
For a change of direction of the ROTAQLEEN press the key
(
green
green
⇒
turquoise
turquoise
) and for back
(
turquoise
turquoise
⇒
green
green
)
Note: The machine can be controlled in parallel with the remote control in the same way
Note: The machine can be controlled in parallel with the remote control in the same way
7. Water quality meter and water clock
7.3
The
water quality meter (Fig. 3)
shows the temperature and the quality of the pure/line water for the
blue hose.
7.4
We recommend changing the granules at a value of 50 µS
7.5
The
water clock (Fig.3)
measures the quantity of pure water produced
8. After cleaning
8.1
Switch off the machine with the
(
green
green
/
turquoise
turquoise
⇒
off
) and/or
(
green
green
/
turquoise
turquoise
⇒
off
) key
8.2
Cleaning solution was used:
• Place the
suction hose for cleaning solution (Fig. 1)
in tap water
• Set the
dosing pump regulator (Fig. 2)
to 100%
• Switch on with the key
(
off
⇒
green
green
) and rinse the dosing pump for 2 min
• Then switch off the machine with the key
(
green
green
⇒
off
)
8.3
Pull out the mains plug (optional), close the water supply and disconnect the connection
8.4
Remove the
connection for the black hose (Fig. 1)
, roll up the hose
Water quality meter
3
9. Battery charging
9.1
The machine must be switched off or running in optional mains operation for charging
(
off
or
turquoise
turquoise
)
9.2
Connect the mains connector of the charger to the mains socket.
9.3
The
charging indicator (Fig. 5)
lights up
red
red
after a short time, changes in the loading process to
yellow
yellow
and
then
green
green
⇒ the charging of the battery is completed
Indicators for battery
Charge indicator
Battery indicator
5
Water clock
4