- 38 -
Loosen nut (2) and rotate the
grip tensioning ring (3) clockwise
to the stop. Loosen the wire rope
adjusting ring lock nut (6), and
rotate the wire tensioning ring (5)
back and forth, until the grip
clearance is about 4 mm. Grip
tensioning ring (3) can be used for
fine tuning. After the adjustment
is completed, tighten locking nut
(2) and (6), and cover them with
rubber sleeve (4).
Adjustment of driving chain
①
Adjusting bolt
②
Locking nut
③
Mark
④
Rear wheel shaft nut
To adjust:
1
、
Park the motorcycle with
central stand.
2
、
Loosen rear wheel shaft nut.
3
、
Loosen the locking nut.
4
、
Rotate the adjusting bolt left
and right to adjust the chain.
Note
：
When
a
new
chain
is
installed, it is necessary to check
both chain wheels. Replace if
necessary.
The tension of driving chain
shall be adjusted every 1000 km,
to keep a removable distance of 20
- 30 mm in the midpoint of the two
chain wheels.
20-30 mm
