10
EN
Minimum duration of the guarantee offered by the supplier (
b
).
This product has been designed to
release silver ions during the washing
cycle
No
Additional information:
Weblink to the supplier’s website, where the information in point 9 of Annex II to
Commission Regulation (EU) 2019/2023 (
1
) (
b
) can be found:
(
a
) for the eco 40-60 programme.
(
b
) changes to these items shall not be considered relevant for the purposes of
paragraph 4 of Article 4 of Regulation (EU) 2017/1369.
(
c
) if the product database automatically generates the definitive content of this cell,
the supplier shall not enter these data.
2.3. PROGRAMMES
You can choose from the following programme according to the laundry type.
Programmes
Cotton
Hard-wearing textiles, heat-resistant textiles made of cotton or linen.
Synthetic
For washing synthetic articles (e.g. shirts, coats, blended fabrics).
When washing knitwear, the detergent quantity should be reduced
to prevent an excessive amount of bubbles from forming.
Mix
Mixed loads consisting of garments made of cotton and synthetics.
20°C
20°C default, can choose cold water.
Sportswear
For washing active and sportswear.
Steam care
For washing baby clothing. This programme cleans and rinses more
intensively to protect your baby’s skin.
Jeans
Special programme for denim clothing.
Rinse & Spin Rinse and spin only.
Spin Only
Spin only with a selectable spin speed.
Bulky
Specially designed for washing duvet coats.
Wool
Hand or machine-washable wool or rich-wool textiles. Especially
gentle wash programme to prevent shrinkage with longer
programme pauses (textiles are left to rest in wash liquor)
ECO 40-60
Default 40°C (not selectable), suitable for laundry washing at 40°C
to 60°C
Intensive
The washing time is increased to remove stubborn dirt.
Quick 15’
For quickly washing a small load of lightly soiled garments within 15
minutes.
Rapid 45’
For quickly washing a small load of lightly soiled garments within 45
minutes.
The table shows which cycle offers which options for adjustment. If an adjustment is
not possible for a cycle, the symbol will flash in the display. Figures in bold correspond
to the factory setting.
