Qihan RS485, Руководство пользователя

Страница: 24 / 35

21
then press
【
Enter
】
to save, LCD will show ( Success ) and back to the former menu.
Choosing the second item (Set right limit), same operation as left limit
Back to scan menu, then press
【
3
】
to run scan.
After entering the set ting dome pattern menu, the joys tick will control the
dome directly, at this time the keys in lens controlling area also can control
the dome lens, the operation of the joystick and the key is invalid for the
dome under general menu mode.
4.2.3 Pattern setting
Enter the menu, as LCD shows (picture 4. 1.1-1)
Move the joystick to
【
2
】
to enter the dome setting menu, as LCD shows ( Picture 4.2. 1- 1)
Move the joystick to
【
3
】
to enter the pattern setting menu, as LCD shows (picture 4. 2.3-1)
1.Pattern num: ＿
2.Set pattern
3.Run pattern
Picture 4.2.3-1
After entering the menu, the system requires in- putting pattern tour that you set in the first
item, the input range is 1-4 , press 【 Enter 】 to confirm ,the cursor will auto -jump to the second
item , to start setting pattern, if user has finished to set pat tern already, you can jump over this
item, and choose
【
3
】
to run pattern directly.
Pattern setting : after entering the pattern menu, to move the dome in an appropriate
position , press 【 1 】 to start tore cord pattern tour. LCD will show ( Start ...... ) as picture 4. 2.3-2
shows.
Press 1 to start
Press 0 to stop
Press prev to back
Picture4.2.3-2