Qiagen Rotor-Gene Q MDx CE Скачать руководство пользователя страница 13

Страница: 13 / 208

Rotor-Gene Q MDx CE User Manual 02/2022

2.1

Proper use

WARNING

Risk of personal injury and material damage

Improper use of the Rotor-Gene Q MDx may cause personal injuries or damage
to the instrument.

The Rotor-Gene Q MDx must only be operated by qualified personnel who have
been appropriately trained.

Servicing of the Rotor-Gene Q MDx instrument must only be performed by a
QIAGEN Field Service Specialist.

Perform the maintenance as described in Section 8. QIAGEN charges for repairs that are required
due to incorrect maintenance.

WARNING

Risk of personal injury and material damage

The Rotor-Gene Q MDx is too heavy to be lifted by one person. To avoid
personal injury or damage to the instrument, do not lift the instrument alone.

Contact QIAGEN Technical Services to relocate the instrument.

WARNING

Risk of personal injury and material damage

Do not attempt to move the Rotor-Gene Q MDx during operation.

CAUTION

Damage to the instrument

Avoid spilling water or chemicals onto the Rotor-Gene Q MDx. Damage caused
by water or chemical spillage will void your warranty.

Note

: In case of emergency, switch off the Rotor-Gene Q MDx at the power switch at the back of

the instrument and unplug the power cord from the power outlet.

Содержание Rotor-Gene Q MDx CE

















































































































































































































Результаты поиска

Содержание Rotor-Gene Q MDx CE

Отзывы:

Qiagen Rotor-Gene Q MDx CE, Руководство пользователя, Страница: 13 / 208

Результаты поиска

Содержание Rotor-Gene Q MDx CE

Отзывы: