Rotor-Gene Q MDx CE User Manual 02/2022
133
Show at Most 2 Analysis
Windows
:
If this option is checked, a maximum of 2 analysis windows are shown at
once. If multiple windows are opened, readability may be affected. Checking
this option closes the first analysis window and replaces it with the last
opened window. If the option is unchecked, more than 2 analysis windows
can be displayed.
Show at Most 6 Windows
:
To improve readability, the software removes unused windows when new
windows are opened. This option is enabled by default, as it keeps the Rotor
Gene Q software screen clear. If it is necessary to see more than 6 windows
at once, uncheck this option.
Reset All “Don't Show This
Message Again” Dialogs
:
If this is selected, the software will redisplay all dialog boxes where the
Do
not display this message again
checkbox was checked. These include
messages about suspicious settings that may have previously been set not to
display again. This may be useful for a new user who is unfamiliar with the
Rotor-Gene Q MDx or the Rotor-Gene Q software.
6.9
Access Protection for Rotor-Gene Q Software
Note
: This chapter describes access protection for Rotor-Gene Q software. See the
Rotor-Gene
AssayManager v1.0 Core Application User Manual
or the
Rotor-Gene AssayManager v2.1 Core
Application User Manual
for information about the relevant Rotor-Gene AssayManager software.
The Rotor-Gene Q software includes features that enable it to operate securely. When correctly
configured, the Rotor-Gene Q software can ensure the following:
Access to the Rotor-Gene Q MDx or the analysis software is restricted to user groups
Modifications to run files are logged
Unauthorized modifications are detected (signatures)
Templates used to perform runs are logged
Sample names are protected
Integration with Windows security
To provide a strong level of accountability, Rotor-Gene Q software does not manage security
internally. Accounts, groups, and passwords are all managed using the Windows built-in security
