Use the USB cable to plug into the USB port of the filter wheel and the other end to connect to the
computer. First install the MaxIm DL, the ASCOM driver of the filter wheel, and also install the USB
serial port driver
.
Open the device manager to check the port number (if the driver is installed on the computer, the
driver to be installed will be detected automatically, otherwise the 2
installed).
Open the MaxIm DL software and click on Camera Contorl. As shown
Popup page
Click on Setup and then click on the Camera model drop-down menu in the Setup Camera to select
the ASCOM option.
Then, click the Advanced button on the right to bring up a new window for ASCOM Camera Chooer,
and then select a virtual camera model from the drop-down menu. This will ensure that the software
runs in an orderly manner.
As shown below:
