QHYCCD QHY09000A, Руководство пользователя

Страница: 6 / 41

QHY16803A
02 Filter installation
QHY16803A contains a built-in 7-Hole 50mm filter wheel. Please follow the instructions below to
install filters for it.
1. Use the screwdriver included in the box to remove the M3*12 screws on the topside of the
camera.
2. You can see the filter wheel after opening the top cap. You can install 50mm filters and fix
them with screws and washers. Please make sure that filters and screws used for fixing the filters
do not touch the top cap and photoelectric position detector.
3. After you've finished installing the filters, you can turn on the camera and connect the camera
to your PC with USB cable to make sure the filter wheel can work properly. Note that the filter
wheel use photoelectric position detector to determine the position of the filter, so make sure
you are not exposing the filter wheel to strong light when you are testing if it can work properly,
otherwise the strong light may affect the photoelectric position detector.
4. Install the top cap.
Now we have finished installing filters, we are going to introduce how to use QHY16803A in
EZCAP_QT, MAXIMDL, and Sequence Generator Pro.