By---pass valve
1
Function
The By---pass valve
A
in Fig. 1 is located between the
changer if thecirculation acrossthe c.h.system iscom-
pletely closed.
erter group.
A
Fig. 1
2
Removal
Warning: isolate the boiler from the mains
electricity supply before removing any
covering or component.
1
Remove all the case panels.
2
Empty the primary circuit of the boiler.
3
Remove the diverter group as described in the
section 8.4 of this manual.
4
Unscrew the connector
B
and remove the by---
pass valve
C
(Fig. 2).
C
B
Fig. 2
5
Reassemble the by---pass valve as illustrated in
Fig. 2 reversing the order of removal.
(edition-0106)
Third Part
RIVA FP SERVICE MANUAL - REV A
12-1