QGarden QG33-1200, Инструкция по эксплуатации, Страница: 15 / 24

-
Before any maintenance, repairing or checking operations.
-
Before carrying, lifting or removing the mower.
-
If you leave the mower unattended or changing the cutting height.
-
To remove and emptying the grass catcher.
-
After hitting a foreign object, stop the motor and check thoroughly the mower in
order to see if it is damaged. Take the machine to a local Approved Service Dealer
for inspection if necessary. Repairs of this nature are not covered under the
Manufacturer’s warranty.
-
If the mower vibrates in an abnormal way, find the reasons why, and take your
mower to a local Approved Service Dealer.
WARNING
After the motor has stopped, the blade will still rotate a couple of seconds.
CAUTION
Operating on gradients could cause the machine to tip over.
Allowing anyone to operate this machine without proper instruction may result in injury.
Wear sturdy, full coverage footwear. Operating this machine with bare feet, or with open toe
shoes or sandals increases your risk of injury.
Do not use the machine at night or in poor light.
Be sure to transport the machine from one place to another with the motor off.
Be sure to wear heavy gloves when cleaning underside of the deck or handling the blade.
To prevent damage, check the machine for any signs of damage or other faults when
operated.
MAINTENANCE & STORAGE
WARNING
Improper maintenance & storage of the machine may void your warranty. Keep the machine
clean for better and safer performance.
Turn off the motor and remove the electrical plug from the power source before performing
any maintenance.
MAINTENANCE
Use only original equipment replacement parts. Other parts may not perform as well, may
damage the unit and may result in injury. In addition, use of other parts may invalidate your
warranty.
• Before each use, check all nuts & bolts to be sure they are sufficiently tightened.
• We recommend only manufacturer original parts are used when maintaining this
machine. Failure to do so could invalidate your manufacturer’s warranty.
• The motor must be switched off and the electrical plug removed from the power source,
before the machine is unassembled, cleaned, serviced or maintained.