19
●
The unit contains different setting menus. Once the initial programming is entered, it will
be remained in the memory until it’s changed, and the unit can always be operated under
the same conditions.
●
This settings will be remained in the memory until the settings are changed even after
setting the player to standby mode.
Common procedure for initial settings
- Press MENU button on unit top or remote control to display the main menu.
- Press LEFT or RIGHT navigation button to select Picture/Audio/Time/Setup/Lock/Channel.
- Press DOWN navigation button to enter submenu page.
- Press UP or DOWN navigation button to select the option that want to adjust.
- Press LEFT or RIGHT navigation button to adjust selected option to desired value.
- Press RIGHT navigation button or ENTER button to enter next menu page.
- Press MENU button to return to previous menu page.
- Press EXIT button to exit menu page.
DTV MODE
- Press SOURCE button on unit top or remote control to set the unit in DTV mode.
First Time Installation
If this is your first time turning on this TV, Setup Wizard will appear on the screen.
- Press UP or DOWN navigation button to select preferred item.
- Press LEFT or RIGHT navigation button to adjust the value.
Menu Language
To choose your menu language.
Air/Cable
To choose your signal type: Air, Cable.
Cable System
To choose desired Cable System: AUTO, STD, IRC,
HRC.
NOTE:
Cable System is adjustable only when your
signal type is set to Cable.
Auto Scan
Highlight Auto Scan, press ENTER to search and store all available channels.
MAIN MENU
