30
– 05|2016 – Subject to change.
KidGoo1 – Q8000-S
Utilisation
Checking the tow bar load
Use bathroom scales, for example, to measure the tow bar load:
f
Load the
KidGoo1
in the usual way and fasten the child in.
f
Do not connect the trailer to the bicycle yet.
f
Place the bathroom scales next to the tow bar.
f
Get onto the bathroom scales and note the weight displayed.
f
Lift the tow bar’s coupler pocket to the coupler height (approx. 35 cm).
f
Determine the tow bar load by making a comparison
with the previous measured value:
–
The weight
must be at least 3 kg more
than the
measured value without the tow bar.
–
The weight
may be a maximum of 8 kg more
than
the measured value without the tow bar.
Changing the tow bar load
Adjust the tow bar load by moving or reducing your baggage:
f
Tow bar load over 8 kg:
Move items of baggage to the rear, e.g. from the storage space to the pouch for small items.
f
Tow bar load less than 3 kg:
Move items of baggage forward, e.g. from the pouch for small items to the storage space.
Total weight too heavy
f
Reduce the baggage weight in the two pouches for small items.
f
Reduce the baggage weight in the storage space.
f
Make sure that the loaded trailer weighs less than 50 kg.
Connecting the trailer to a bicycle
Danger!
Do not connect the
KidGoo1
to a bicycle until the following conditions have been
fulfilled:
The trailer is fully loaded.
The child is wearing a bicycle helmet and is properly fastened in.
The buggy wheel has been removed.
The tow bar load has been checked and is within the permissible range (3 – 8 kg).
