QEP TORQUE MASTER XT, Руководство пользователя

Страница: 6 / 36

– 4 –
TO REDUCE THE RISk
OF ELECTROCUTION, kEEP ALL CONNECTIONS
DRY AND OFF THE GROUND. DO NOT TOUCH
PLUG WITH WET HANDS.
2 . Ground Fault Circuit Interrupter (GFCI)
protection should be provided on the circuit(s)
or outlet(s) to be used for the tile saw .
Receptacles are available having built-in GFCI
protection and may be used for this measure
of safety .
3 .
use proper eXtension cord.
Make
sure your extension cord is in good condition .
When using an extension cord, be sure to use
a cord heavy enough to carry the current your
product will draw . An undersized cord will
cause a drop in line voltage, resulting in loss
power and overheating . TABlE 1 shows the
correct size to use depending on cord length
and nameplate ampere rating . If in doubt, use
the next heavier gauge . The smaller the gauge
number, the heavier the cord .
note : When using an extension cord, ensure
all cords are no smaller than #12 gauge, rated
at a 20-amp minimum, and equipped with
3-prong plugs . Use of anything smaller may
result in overheating or burn out of the motor . It
is recommended to have an electrician check
the voltage at the saw motor to ensure proper
voltage to run the saw efficiently and safely.
CALIFORNIA
PROPOSITION 65
SOME DUST CREATED
BY POWER SANDING, SAWING, GRINDING,
DRILLING AND OTHER CONSTRUCTION
ACTIVITIES CONTAIN CHEMICALS kNOWN
TO THE STATE OF CALIFORNIA TO CAUSE
CANCER, BIRTH DEFECTS OR OTHER
REPRODUCTIVE HARM.
Some examples of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks, cement and other
masonry products
• Arsenic and chromium from chemically-treated
lumber
Your risk from these exposures varies, depending
on how often you do this type of work . To reduce
your exposure to these chemicals: work in well
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specifically designed to filter out microscopic
particles .
DESCRIPTION
Before attempting to use any tool, be sure to
familiarize yourself with all the operating features
and safety instructions .
• The Torque Master XT Tile Saw contains a
unique Hi-Torque geared motor, which when
in use produces a distinctive loud sound .
This is a characteristic of the High
Performance motor and is important in
producing the torque for optimum cutting
performance .
• For best results allow the blade to do the
work, rather than forcing the tile through the
machine . Should the blade stop, simply ease
the tile away and then continue cutting using
slightly less pressure .
• Wet cutting.
• Water reservoir completely separated from all
electrical components .
• 4 in. continuous rim diamond blade included
for cutting tile and other materials .*
• Adjusting table for precision angle cuts (22 .5°, 45°)
• Depth of cut with a 4 in. blade is ¾ in . (19 mm) .
* This saw comes with a diamond blade that is ideal
for cutting ceramic tile . If your project requires the
cutting of other substrates, including porcelain, it
is recommended that you use the specific type of
blade for the material being cut .
Ampere rating
Volts Total length of cord in feet
120 V 25 ft . 50 ft . 100 ft . 150 ft .
240 V 50 ft . 100 ft . 200 ft . 300 ft .
More than No more than AWG
0 6 18 16 16 14
6 10 18 16 14 12
10 12 16 16 14 12
12 16 14 12 Not recommended
table 1