QEP 60089Q, Руководство пользователя

Страница: 10 / 36

- 10 -
SAW MAINTENANCE
To avoid accidents, ALWAYS disconnect the tool from the power source BEFORE cleaning or
performing any maintenance
Please do not try to service this machine on your own.
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from
various types of commercial solvents and may be damaged by their use. Use clean cloths to remove
dirt, carbon dust, etc.
DO NOT at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc.
come in contact with plastic parts. They contain chemicals that can damage, weaken or destroy plastic.
1. always clean the tile saw after each use and store it in a dry location.
2. always wipe off all exterior surfaces and keep the cutting table clean and free of all debris.
3. always check the blade for cracks or damage BEFORE each use.
4. always store the cord in the compartment underneath the saw after each use.
TROUBLESHOOTING
overheating of saw:
A. Turn saw off and let it rest until motor is cool to the touch.
B. Check and clean the ventilation slots, removing blockage and dirt.
the saw does not start:
A. Check that power cord is properly plugged in.
B. No power from outlet.
C. Switch is damaged.