Hold down any two buttons
on the MyKey which is the
primary controller, LED will
light white. Choose the green
menu and the cyan option
by using button three or four.
Confirm with button two.
For other products read the
manual for inclusion mode.
On the MyKey to be added
hold down any two buttons
until the LED lights white
then choose the blue menu
and the yellow option using
button three or four. Confirm
with button two and it will
begin linking.
After successful linking, both
devices’ LEDs will light green
for two seconds. (For QEES
devices only)
Your MyKey has been added
to the network and can now
be used to wirelessly control
other devices in your Z-Wave
network.
Adding MyKey to existing networks
1
2
3
4
4
1
3
2
MyKey_EN__HOL.indd 7
05-07-2012 09:01:09
