Snip your appliance’s
power cable where you
want your RETO Shell
placed. Strip the wires as
illustrated in
figure 4
.
Take off the back cover of
your RETO Shell by remov-
ing the four screws shown
in
figure 5
.
If your appliance has
a ground/earth wire,
connect it to the terminal
block marked (the
ground/earth wire in the
EU is typically green/yel-
low, US typically green).
The stripped wires from
your appliance’s cables
are to be connected to
terminals L and N. The
wires to the appliance go
into the terminal block
marked
OUT
.
50 mm
5 m
m
Cable Relief
Terminal Blocks
4
5
6
7
