Include unit
1) Push service button briefl y 1 time.
2) Wait for QEES Ring to fl ash 1 time per second.
3) Activate the unit to be included.
4) QEES Ring shines green constantly for about
2 seconds, and inclusion is ok.
Associate unit with button
1) Push service button 1 time, followed by push 1 time
on the button to be associated with the unit.
2) Wait for QEES Ring to fl ash orange. (Red + Green).
3) Activate the unit to be controlled.
4) QEES Ring shines green for about 2 seconds, and
association is ok.
Exclusion of unit
1) Push service button briefl y 2 times.
2) Wait for QEES Ring to fl ash 2 times per second.
3) Activate the unit to be excluded.
4) QEES Ring shines green for about 2 seconds, and
exclusion is ok.
Remove unit from button
1) Same method as association. If an association
already exists, it will be removed.
Remove all functionality from one button
1) Push service button 2 times, followed by push 1
time on the button that need functionality removed.
2) QEES Ring shines green for about 2 seconds.
Include QEES Ring on a Z-Wave controller
1) Push service button briefl y 3 times.
2) Wait for QEES Ring to fl ash 3 times per second.
3) Activate inclusion on the Z-Wave controller.
4) QEES Ring shines green for about 2 seconds, and
inclusion is ok.
Reset to default setting
1) Push service button 3 times, followed by push
button 4, 3 times.
2) QEES Ring shines green for about 2 seconds.
3) QEES Ring has now been reset to default setting.
Send info (node info)
1) Push service button 1 time, followed by hold down
service button.
2) QEES Ring shines green for about 2 seconds.
Send wake-up
1) Hold down service button.
2) QEES Ring shines green for about 2 seconds.
Quick guide
Service button
2
4
1
3
13
