Qeedji SMH300, Руководство пользователя

Страница: 36 / 80

36
user preferences listed in
User preferences for SLATE device
chapter.
write down the list of all the
PSN
/
Hostname
/pairing
PIN code
of the paired SLATE devices,
unpair all the SLATEs listed above.
on the new SMH300:
configure the SMH300 device by keeping the same user preferences value for SLATE configuration,
pair all the SLATEs, whose the list has been saved with their
PSN
/
Hostname
/pairing
PIN code
.
if a pairing
PIN code
was used, you must enter the right pairing
PIN code
.
Change the pairing PIN code
To get the pairing
PIN code
and the
Hostname
of a paired SLATE device, connect to the SMH300 device Web user interface, and in the
Maintenance >
SLATE pairing
menu, click on the button
Activate
, double click on each device of the
SLATEs paired to this device
right table, and note the pairing
PIN code
and the
Hostname
.
PIN code forgotten
If you don’t remember the pairing
PIN code
for a device making that the device SLATE pairing can not complete, the only way is to connect it to a
computer with an USB cable :
either you can edit the preference values by executing the
APPLI.HTA
HTML application and get the pairing
PIN code
value in the field
Authentication method > PIN code
, eject properly the USB mass storage, then try again to pair the device the right pairing
PIN code
this time,
or remove the configuration files
APPLI.CFG
, eject properly the USB mass storage, then try again to pair the device without pairing
PIN code
.
Restore factory preferences
After a factory preferences restoring using the
Administration console
user interface, the SLATEs are kept in the
SLATEs paired to this device
right
table, but:
their hostname are reset the
slate106
value,
their
PINCODE
are reset to no
PINC O DE
,
their test card are displayed.