Qeedji SBL10e, Руководство пользователя

Страница: 11 / 37

11
Configuration
The
Smart Busy Light
application supports the configuration update:
by connecting to the
Administration console
user interface
http://<device-ip-addr>/
and changing parameters,
by pushing, from a WebDAV client or with the device Web user interface, a
prefs.json
configuration file on the device WebDAV directory
http://<device-ip-addr>/.conf/
,
by pushing, from a WebDAV client or with the device Web user interface, a
.js
configuration script on the device WebDAV directory
http://<device-ip-addr>/.conf/
,
by receiving a
configure
command with an appropriate
.js
configuration script from the
Qether
tool (Qether V 1.12.10 or above).
Firmware upgrade
The
Smart Busy Light
application supports the firmware upgrade:
by connecting to the
Administration console
user interface
http://<device-ip-addr>/
and loading an appropriate firmware file
bm0032_generic_server-sbl10e-xx.yy.zz.bin
¹ firmware file,
by pushing a new
bm0032_generic_server-sbl10e-xx.yy.zz.bin
¹ firmware file at the root of the device WebDAV directory
http://<device-ip-addr>/
,
pushed with a WebDAV client,
by receiving an
install
command with an appropriate
bm0032_generic_server-sbl10e-xx.yy.zz.bin
¹ firmware file from the
Qether
tool.
¹ Can work also with any other
bm0032_<custom>-sbl10e-x x .y y .z z
compatible firmware .
☛ After a firmware upgrade, the device is rebooting once.
☛ When the
configuration
command or the
install
command has been processed, the last
S mart B usy L ight
state and color are restored.
Preprogrammed flashing sequence
The SBL10e device has two modes:
Nominal mode
: the
Smart Busy Light
application runs properly and sets the light state and color as expected. When a configuration or a firmware
upgrade is in progress, the light illumination can be temporarily inconsistent and follows the light flashing sequence shown in the table hereafter.
Recovery mode
: the
Smart Busy Light
application can not be executed. The light state or color can not be modified anymore. It is required to
update the firmware to return to the
nominal mode
.