Qeedji 4.13.15 002E, Руководство пользователя

Страница: 41 / 65

41
3.1.13 Maintenance > Test card
From the
Maintenance
pane, select the Test card menu to enable or disable the test pattern. The test pattern is often enabled during:
installing devices on the network,
the development of the output resolution and overscan.
☛ When the test card is activated, the content of the App is not played.
Activation of the test pattern through your screen supporting CEC
If your screen supports the CEC¹ ² on H DMI, you can enable or disable the test pattern by pressing a key combination on the screen' s remote control:
[ left Arrow, Right Arrow, Left Arrow, Right Arrow] key combination in less than 10 seconds.
☛ Mak e sure that no menus or banners are displayed on the screen.
☛ B efore applying the k eystrok e combination, some screen req uires to unselect and then select the HDMI source of the display to which the
device is connected to force a CECSetInput_ Source.
¹ For
SAMSUNG
screen, CEC is usually activated by activating the
Anynet
function. ² for
LG
screen, CEC is usually activated by using the
Simplink
key on the remote control.
Function Linked U ser Preference
Support for test pattern activation by key combination
innes.player.test pattern.key-event.*.authorized
(default= true)