ROOMLINK is designed to offer the benefits of controlling your remote control video or hi-fi system
from any room you choose.
ROOMLINK is derived from the more sophisticated award winning SYSTEMLINE multi-room system,
and as such benefits from the considerable design expertise gained with that project.
ROOMLINK works by allowing the original hi-fi system (or video) remote control handset to be used
from any room you choose, the infra-red codes being received by a wall mounted sensor placed in the
extension room. The sensor then relays the codes back to the equipment in the main room. In addition
to the sensor, a speaker on/off switch or Speaker Volume Control is normally fitted in the extension
room, as this allows local control over sound selection. (see section 3 for examples).
NOTE: "Please note that a small number of IR codes will not pass through Roomlink successfully.
Please ensure complete operation before running wires and installing back boxes etc."
ROOMLINK is not suitable for use with most B&O and some satellite and cable equipment, as their infra-
red carrier system operates at a non-standard frequency.
1) ONE x ROOMLINK DRIVER
2) TWO x FLOOD EMITTERS (SL-FE)
3) ONE x PLUG TOP POWER SUPPLY (UK ONLY)
STARTER PACK 3 CONTENTS
ROOMLINK is available as a starter pack which incorporates the following:
4) ONE x ROOMLINK SENSOR (including plug-in connector)
5) TWO x WINDOW EMITTER PACKS (SL-DE)
ROOMLINK RL-SP3 STARTER PACK
Installation Document
