background image

Terms, Conditions, and Warranty 

Five Year Warranty

This limited warranty is in lieu of and excludes all other representations made by advertisements, distributors, agents, or 

manufacturers sales representatives, and all other warranties, both express and implied.  There are no implied warranties 

of merchantability or of fitness for a particular purpose for goods covered hereunder.

QED Environmental Systems warrants to the purchaser of its products that, subject to the limitations and conditions 

provided within the Terms & Conditions of Sale, products, materials and/or workmanship shall reasonably conform to 

descriptions of the products and shall be free of defects in material and workmanship.

All warranty durations are calculated from the original date of purchase—determined as beginning the date of shipment 

from QED facilities and the date QED is notified od a warranty claim. This warranty shall be limited to the duration and 

conditions set forth below.

1. AP4+ AutoPumps -

 Warranted for five (5) years: This limited warranty coverage only applies to long and short AP4+ 

AutoPumps purchased with this warranty.  There will be no warranty for application or material compatibility. The materials 

used in pumps vary depending upon application and the customer is responsible for knowing the  environment in which the 

pump will be operating and working with QED to determine what materials of construction will be best for the application.

The warranty is valid when the following conditions exist:  when the site has a pH between 4 and 9, has a salinity of 3500 

ppm or less, is between 40 and 180 degrees Fahrenheit, is non-corrosive to the construction materials of the pump; and is 

not abrasive.  Typical commercial fuels are acceptable materials in free or dissolved phase. The pumps and accessories 

must be operated within the specifications and limits given in the manual for the particular piece of equipment.

2. Hose, Tubing, Fittings, And Air Filtration Housings - 

Warranted for one (1) year: 100% material and 100%  

workmanship. There will be no warranty for application or material compatibility. The materials used vary depending upon 

application and the customer is responsible for knowing the environment in which the equipment will be operating and  

working with QED to determine what materials of construction will be best for the application.

3.Pneumatic Data Modules -

 Warranted for one (1) year: 100% material and 100% workmanship.

4.Parts and Repairs - 

Warranted for ninety (90) days: 100% material and 100% workmanship; when repairs are 

performed by QED or its appointed agent; from date of repair or for the full term of the original warranty, whichever is 

longer.  Separately sold parts are warranted for ninety (90) days: 100% materials and 100% workmanship.

This warranty will be void in the event of unauthorized disassembly of component assemblies. Defects in any equipment 

that result from abuse, operation in any manner outside the recommended procedures, use and applications other than 

for intended use or exposure to chemical or physical environments beyond the designated limits of materials and 

construction, will also void the warranty.

Chemical attack by liquids and/or abrasive substances contacting equipment and accessories shall not be covered by this 

warranty.  A range of materials of construction is available from QED and it is the buyer’s responsibility to select materials

of construction to fit buyer’s application. QED will only warrant that the supplied site liquid contacting materials will 

conform to published QED specifications and generally accepted standards for that particular material.

QED Environmental Systems shall be released from all obligations under all warranties if any product covered hereby

is repaired or modified by persons other than QED service personnel (unless such repair by others is made with the 

written consent of QED); resold to other parties; and/or moved to or used on a site other than originally specified.

It is understood and agreed that QED Environmental Systems shall in no event be liable for incidental or consequential 

damages resulting from its breach of any of the terms of this agreement, nor for special damages, nor for improper 

selection of any product described or referred to for a particular application.  Liability under this warranty is limited to 

repair or replacement F.O.B. QED’s factory, or its appointed agent’s shop, of any parts which prove to be defective 

within the duration and conditions set forth herein, or repayment of the purchase price at the option of QED, provided the 

products have been returned in accordance with the duration and conditions set forth herein.      

47

Содержание AP4+























































Отзывы: