2.5 Parking guide line setting
www.qdis.co.kr
13
PARK
* PARK ENABLE : Selecting whether to
display the parking guide line or not
on rear gear (default : OFF)
* PARK SETUP : Adjusting the position of
the parking guide line (available in
PARK SETUP -> V-POSITION, H-POSITION)
* SAFE ENABLE : In case of Connecting
“Safe” wire from the power cable to
the hand break,
ENABLE – OEM Picture displays in Drive
gear position
DISABLE – No display locked in any
gear position
PARK - ENABLE
A. If you set ‘PARK ENABLE’ as
“ON” state, there will be the rear
view parking guide line.
(as shown left picture)
B. Press the OK button of remote
controller, ‘’H_POS’’ will be
shown on the right and control
moving in horizontal direction.
PARK - ENABLE
A. Press the OK button of remote
control one more, ‘’V_POS’’ will
be shown on the right and control
moving in vertical direction.
FACTORY mode – Press
◀
button 5 seconds long on the remote control.
