3. Settings
-11-
3.3 Car Model and Navi Model
IMAGE
Adjust navigation position and size
H-POSITION : Move display horizontally
V-POSITION : Move display vertically
H-SIZE : Adjust navi size horizontally
UTIL1 - CAR MODEL
Selecting model of the car
F20 : 1, 3, 5, 7 series 6.5” & 8.8”
New UI 8.8” 10.2”
* Set pin#5 of DIP switch to the
right size of the monitor after
selecting model of the car.
(Refer to page9.)
UTIL1 – NAVI MODEL
Definition of the navigation
resolution
DEFAULT : default, 400X234, low
resolution
KD-900(WVGA) : 800x480 in high
resolution, for Chinese
LS-901(WQVGA) : 800x480 in high
resolution, for Chinese, Taiwan
WP9200(WVGA) : 800x480 in high
resolution, for Israel
GI-8000N 3D(WVGA) : 800x480 in
high resolution, for Korea
GI-5000A(WVGA) : 800x480 in
high resolution, for Korea
I-ONE(WVGA) : 800x480 in high
resolution, for Korea
HDMI (when SMI installed):
800x480 in high resolution
* Go into FACTORY/ IMAGE (as
shown right) and adjust the
position and the size of the
navigation after setting the
definition of the navigation
FACTORY mode – Press
◀
button 2 seconds long on the remote control.
Setup for car model
Setup for navigation
