User’s Manual
27
bars.
3.
Follow the on-screen prompts to complete the Windows
NT 4.0 driver or monitor configuration.
BIOS Upgrade
On rare occasions, it may be necessary to upgrade the video BIOS on
your VISION-1 card. In such a case, you will receive a new BIOS
Binary file and a utility called DOSPROM to install the BIOS into the
card.
Follow the steps below for upgrading your video BIOS:
Step 1.
Start in DOS mode. The BIOS upgrade procedure
cannot be executed from within Windows 95. If you
are already running Windows, shut down your
system and restart in DOS mode.
Step 2.
If you have received the upgraded BIOS files, at the DOS
prompt, create a directory in your hard disk.
Copy the upgraded files into this directory. Change
the directory to the upgraded BIOS directory.
Step 3.
At the DOS prompt, change the directory to the upgraded
BIOS directory, type the following command to install the
new BIOS into VISION-1 card’s Flash Memory.
DOSPROM xxxx.rom
xxxx.rom is the BIOS BIN File you received. This will load
Содержание Vision-1
