17
PlatiniX 8/333
PlatiniX 8/333
PlatiniX 8/333
PlatiniX 8/333
PlatiniX 8/333
Chapter 2
Chapter 2
Chapter 2
Chapter 2
Chapter 2
Jumper Settings
Jumpers are located on the mainboard, the clear CMOS jumper CLR_CMOS, enable key-
board password power-on function jumper JKB etc. Pin 1 for all jumpers are located on the
side with a thick white line (Pin1
→
), referring to the mainboard’s silkscreen.
Jumpers with three pins will be shown as
to represent pin1 & pin2 (“1-2”) closed
and
to represent pin2 & pin3 (“2-3”) closed.
Jumper Symbol Description Represent
1-2
1-2
1-2
1-2
1-2
set pin1 and pin2 closed
2-3
2-3
2-3
2-3
2-3
set pin2 and pin3 closed
close set the pins closed
open set the pins opened
Enable Front/Back Panel USB Device Wake-up Function (JFUSB/JUSB)
(optional)
The mainboard provides the advanced USB device wake-up function. The system can be
waked up from its power saving status including ACPI S3 by activating USB device. Before
using this function, set JFUSB/JUSB with pin1 & pin2 closed. Otherwise, set JFUSB/JUSB
with pin2 & pin3 closed for disabling. Furthermore, the item “Wake-Up From S3 by USB”in
Power Management Setup should also be set correspondingly to enable or disable this
function.
JUSB
JFUSB
Enable
Disable
Disable
Enable
1
2
3
1
2
3
1 2 3
1 2 3
