QDI PlatiniX 8 Series, Руководство пользователя

Страница: 24 / 73

Installation Instructions
16 Manual for PlatiniX 8 series
Jumper Settings
Jumpers are located on the mainboard, the yare, clear CMOS jumper JCC, enable keyboard
password power-on function jumper JKB, and enable/disable onboard audio jumper JSD
etc. Pin 1 for all jumpers are located on the side with a thick white line (Pin1
→
),
referring to the mainboard’s silkscreen. Jumpers with three pins will be shown as
to represent pin1 & pin2 (“1-2”) closed and
to represent pin2 & pin3 (“2-3”) closed.
Jumper Symbol Description Represent
set pin1 and pin2 closed
set pin2 and pin3 closed
close set the pins closed
open set the pins opened
Enable Front/Back Panel USB Device Wake-up Function (JFUSB/JUSB)
The mainboard provides the advanced USB device wake-up function. The system can be
waked up from its power saving status including ACPI S3 by activating USB device.
Before using this function, set JFUSB/JUSB with pin1 & pin2 closed. Otherwise, set
JFUSB/JUSB with pin2 & pin3 closed for disabling. Furthermore, the item “Wake-Up From
S3 by USB”in CMOS Setup should also be set correspondingly to enable or disable this
function.
JUSB
JFUSB
JFUSB JUSB
Enable
(default)
Disable
JFUSB JUSB
1 2 3
1 2 3
1
2
3
1
2
3
P8en.p65 02-4-30, 16:28 16