Manual for P7B series
Chapter 2
18
Enable Front/Back Panel USB Device Wake-up Function (JFUSB/JUSB)
The mainboard provides the advanced USB device wake-up function. The system can be
waked up from its power saving mode including ACPI S3 by activating USB device. Before
using this function, set JUSB/JFUSB as pin1 & pin2 closed. Otherwise, set JUSB/JFUSB
as pin2 & pin3 closed for disabling. Furthermore, the item “Wake-Up From S3 by USB”in
BIOS setup should also be set corespondingly to enable or disable this function.
JFUSB
Only for USB3& USB4
JUSB
Only for USB1,2
Disable:
Enable:
(Default)
JUSB JFUSB
JUSB JFUSB
1
2
3
1
2
3
1
2
3
1
2
3
Enable/Disable onboard audio (JSD)
(Available on -A,-AL,-6A,-6AL series mainboard)
If you want to use the on-board audio, set JSD as pin2 & pin3 closed (default), Otherwise,
set JSD as pin1 & pin2 closed for disabling this function.Please disable onboard audio
when using expansion audio card.
JSD
1
2
3
1
2
3
Enable
Onboard Audio
(Default)
Disable
Onboard Audio
