QDI PlatiniX 1E, Руководство пользователя

Страница: 54 / 75

46 Manual for PlatiniX 1E series
B. Using QFlash (Under Windows ):
1. Download the QFlash Utility from the Website (http://www.qdigrp.com) or get it from
QDI Driver CD.
2. Run QFlash program step by step,following the directions until complete it .
3. Reboot the system, you can see the new picture displayed on the screen.
NOTE:
If you require more parameters information concerning “CBLOGO.EXE”, please refer to
the online help. If you don’t prefer the logo displayed on the screen during bootup, set
the “Show Bootup Logo” option as Disabled in CMOS Setup.
* We reserve the right of modifying the default full-logo of QDI without further
notification.
A. Using CBLOGO.EXE Utility (Under DOS ):
1.Copy “CBLOGO.EXE”and “AWDFLASH.EXE” from the directory \Utility located on QDI
Driver CD to your hard disk.
2. Get the BIOS file from “AWDFLASH.EXE” or Download the BIOS file from the
Website (http://www.qdigrp.com) and copy the BIOS file(xxxxxx.bin) to your hard
disk.
3. Boot the system into DOS environment, Put your favor picture into BIOS file by
“CBLOGO.EXE” command. For example: CBLOGO.EXE xxxxxx.bin myphoto.bmp
4. Flash the BIOS to motherboard by “AWDFLASH.EXE”. For example: AWDFLASH
xxxxxx.bin
The BIOS of the mainboard is contained inside the Flash ROM. Severe viruses such as CIH
virus are so dangerous that it may overwrite the BIOS of the mainboard. If the BIOS has
been damaged, the system will be unable to boot. We provide the following solution which
protects the system BIOS from being attacked by such viruses.
There are two choices which implements this function.
1. Set the jumper (JAV) as closed, the BIOS can not be overwritten.
2. Set the jumper (JAV) as opened, meanwhile set “Flash Write Protect” as Enabled in
CMOS Setup. In this way, the BIOS can not be overwritten, but the DMI information can
be updated.
BIOS-ProtectEasy BIOS-ProtectEasy
BIOS-ProtectEasy BIOS-ProtectEasy BIOS-ProtectEasy
P1Een.p65 02-6-5, 16:27 46