Manual for PlatiniX 1
Item
Option Description
#"
First (Second,
Disabled
Select Your Boot Device Priority. It could be
Third) Boot Device
Floppy
Disabled, Floppy, LS120,ZIP100, HDD-0, HDD-1,
Boot Other Device
HDD-2, HDD-3, SCSI, CDROM, LAN.
......
"""""""""""""
CDROM
#"
Swap Floppy
Enabled
If the system has two floppy drives, choose
Drive
Disabled
enable to assign physical drive B to logical drive
A and vice-versa.
#"
Boot Up
O n
Select power on state for NumLock.
NumLock Status
Off
#"
Gate A20 Option
Normal
Let chipset control GateA20 and Normal - a pin
Fast
in the keyboard controller controls GateA20.
Default is Fast.
#"
Typermatic Rate
Enabled
Keystrokes repeat at a rate determined by the
Setting
Disabled
keyboard controller - when enabled, the typematic
rate and typematic delay can be selected.
#"
Typermatic Rate
6~30
The rate at which character repeats when you
(chars/sec)
hold down a key.
#"
Typermatic Delay
250~1000
The delay before keystrokes begin to repeat.
(Msec)
#"
Security Option
Setup
Select whether the password is required every
System
time the system boot or only when you enter
setup.
#"
OS Select For
Non-OS2
Select OS2 only if you are running OS/2 operating
DRAM>64MB
OS2
system with more than 64MB of RAM.
#"
HDD S.M.A.R.T.
Enabled
Enable hard disk S.M.A.R.T. support.
Capability
Disabled
Invalidate this feature.
BIOS Description
