QDI P6I845/P2D, Руководство пользователя

Страница: 48 / 75

Manual for PlatiniX 2D series
LogoEasyII
LogoEasyII
Thank you for using QDI upgraded innovation--- LogoEasy II, which is completely com-
patible with LOGOEASY. Both BMP-fomat and JPEG-format graphics files can be used.It
supports the high-resolution 640*480 or 800*600 image display and full-screen, top right
corner or bottom right corner display,making your boot logo colorful and diversiform.
When you power on or reset your system, the picture shown below will be displayed on
the screen.
2. Get the BIOS file from “AWDFLASH.EXE” or Download the BIOS file from the
Website (http://www.qdigrp.com) and copy the BIOS file(xxxxxx.bin) to your hard
disk.
3. Boot the system into DOS environment, Put your favor picture into BIOS file by
“CBLOGO.EXE” command. For example: CBLOGO.EXE xxxxxx.bin myphoto.bmp
4. Flash the BIOS to motherboard by “AWDFLASH.EXE”. For example: AWDFLASH
xxxxxx.bin
A. Using QFlash (Under Windows ):
1. Download the QFlash Utility from the Website (http://www.qdigrp.com) or get it from
QDI Driver CD.
2.Run QFlash program step by step,following the directions until complete it .
Reboot the system, you can see the new picture displayed on the screen. If you require
more parameters information concerning “CBLOGO.EXE”, please refer to the online help. If
you don’t prefer the logo displayed on the screen during bootup, set the “Show Bootup
Logo” option as Disabled in the “ADVANCED BIOS FEATURES ” section of the BIOS.
* We reserve the right of modifying the default full-logo of QDI without further
notification.
You can use “ LogoEasy II ” to replace it by any
other logo which you prefer.
We provide two Utilities in the QDI Driver CD ,which
bring user two means to select:
A. Using CBLOGO.EXE Utility (Under DOS ):
1. Copy “CBLOGO.EXE”and “AWDFLASH.EXE”
from the directory \Utility located on QDI Driver CD
to your hard disk.