QDI P6I440EX/MATX EXCELLENT II, Руководство пользователя

Страница: 38 / 52

AWARD BIOS Description
3 - 8
•
EDO DRAM Write
Burst
×
2 2 2,
×
3 3 3,
The DRAM write burst timing depends on the type
of DRAM on a per-row basis. Slower rates may be
required to support slower DRAM.
•
DRAM ECC
Select
ECC Provides the ECC (Error Checking and Correction)
function.
Disabled Disables the ECC / EC function.
•
CPU-To-PCI
IDE Posting
Enabled
Disabled Enables CPU-To-PCI write posting.
Disables CPU-To-PCI write cycles to IDE.
•
System BIOS
Cacheable
Enabled Beside conventional memory, the system BIOS area
is also cacheable.
Disabled
The system BIOS area is not cacheable.
•
Video BIOS
Cacheable
Enabled
Disabled
Beside conventional memory, video BIOS area is
also cacheable.
Video BIOS area is not cacheable.
•
Video RAM
Cacheable
Enabled Beside conventional memory, video RAM area is
also cacheable.
Disabled Video BIOS area is not cacheable.
•
8 Bit I/ O Recovery
Time
1
∼
8
Defines the ISA Bus 8 bit I/O operating recovery
time.
NA 8 bit I/O recovery time does not exist.
•
16 Bit I / O
Recovery Time
1
∼
4
Defines the ISA Bus 16 bit I/O operating recovery
time.
NA 16 bit I/O recovery time does not exist.
•
Memory Hole At
15M-16M
Enabled Memory Hole at 15-16M is reserved for expanded
PCI card.
Disabled
Do not set this memory hole.
•
Passive Release
Enabled
Disabled Default use is suggested.
•
Delayed Transaction
Disabled
Enabled Default use is suggested.
•
AGP Aperture Size
(MB)
4
∼
256
Sets the effective size of the Graphics Aperture to
be used in the particular PAC Configuration.
•
SDRAM RAS-To-
CAS Delay
Fast
Slow RAS-To-CAS Delay time=2 HCLK
RAS-To-CAS Delay time=3 HCLK
•
SDRAM RAS
Time
Fast
Slow RAS Time=2 HCLK
RAS Time=3 HCLK
•
SDRAM CAS
Latency Time
Fast
Slow
Defines the CLT timing parameter of SDRAM
expressed in 66 MHz clocks. Latency Time=2
clocks
Latency Time=3 clocks
Power Management Setup
ROM PCI/ISA BIOS (2A69JQ1K)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management :User Define ** Reload Global Timer Events **
PM Control by APM :Yes IRQ [3-7, 9-15], NMI :Enabled
Video Off Method :V/H SYNC+Blank Primary IDE 0 :Disabled
Video Off After :Suspend Primary IDE 1 :Disabled