QDI N2, Руководство пользователя, Страница: 20 / 66

Installation Instructions
14
Manual for N2 series
Clear CMOS (JCC)
If you want to clear CMOS, unplug the AC power supply first, close JCC (pin1 & pin2) once,
set JCC back to the normal status with pin2 & pin3 connected, then power on the system.
Enable Front/Back Panel USB Device Wake-up Function (JFUSB/JUSB)
The mainboard provides the advanced USB device wake-up function. The system can be
waked up from its power saving mode including ACPI S3 by activating USB device. Before
using this function, set JUSB/JFUSB as pin1 & pin2 closed. Otherwise, set JUSB/JFUSB
as pin2 & pin3 closed for disabling. Furthermore, the item “Wake-Up From S3 by USB”in
BIOS setup should also be set corespondingly to enable or disable this function.
Clear CMOS:
(Unplug the AC power supply)
JCC
Normal Status
(Default)
1 2 3
1
2
3
JFUSB
Only for USB3,4,5,6
JUSB
Only for USB1,2
Disable
Enable
(Default)
1
2
3
1
2
3
1
2
3
1
2
3
Disable
Enable
(Default)
N2en.p65 02-6-4, 16:53 14