QDI Legend-IV, Руководство пользователя

Страница: 28 / 45

AWARD BIOS Description
4 - 10
into any power saving mode. But if APM is not
installed, this option has no effect.
•
Video Off
Method
Blank Screen The system BIOS will only blank off the screen
when disabling video.
V / H SYNC +
Blank In addition to Blank Screen, BIOS will also turn
off the V-SYNC & H - SYNC signals from VGA
cards to monitor.
DPMS
This function is enabled only for the VGA card
supporting DPMS.
Note: Green monitors detect the V/H-SYNC
signals to turn off its electron gun .
•
Video Off After N/A
System BIOS will never turn off the screen.
Suspend Screen off after system enters into Suspend mode.
Standby Screen off after system enters into Standby mode.
Doze Screen off after system enters into Doze mode.
•
Doze mode Disabled
The system will never enter Doze mode.
1Min
∼
1 Hr Define the continuous idle time before the system
entering Doze mode. If any item defined in
“Wake Up Events In Doze & Suspend” is On and
activated, the system will be waken up.
•
Standby
Mode
Disabled
1 Min
∼
1Hr
The system will never enter Standby mode.
Define the continuous idle time before the system
entering Standby mode. If any item defined in
“Wake Up Events In Doze & Suspend” is On and
activated, the system will be waken up.
•
Suspend
Mode
Disabled
1 Min
∼
1Hr
The system will never enter Suspend mode.
Define the continuous idle time before the system
entering Suspend mode. If any item defined in
“Wake Up Events In Suspend” is On and
activated, the system will be waken up.
•
HDD Power
Down
Disabled
1
∼
15 Min
HDD’s motor will not be off.
Define the continuous HDD idle time before the
HDD entering power saving mode (motor off).
•
VGA Active
Monitor
Disabled
•
Resume by Ring
Enabled
Disabled
Allow the system to be powered on when a Ring
Indicator signal comes up to UART1 or UART2
from external modem.
Do not allow Ring Power-On.
•
Resume by Alarm Enabled
Disabled
RTC alarm can be used to generate a wake event
when the system is in a sleeping.
RTC no alarm function.
•
IRQ 8 Clock
Event
Enabled
Disabled Generate a clock event.
Do not generate a clock event.
Note: IRQ8 Clock Event must be enabled when