Manual for Advance 10T
Item
Option Description
#
"
ACPI Suspend
S1(POS)
Selects the ACPI suspend type.
Type
S3(STR)
#
"
PM Control by
NO
System BIOS will ignore APM when Power
APM
Management is enabled.
Yes
System BIOS will wait for APMs prompt before
entering any PM mode e.g. Standby or Suspend.
#
"
Video Off Option
Always On
System BIOS will never turn off the screen.
Suspend off
Screen blanks after the system enters suspend
mode.
All Modes off
Screen blanks after the system enters standby,
Suspend, Doze mode.
#
"
Video Off
Blank Screen
The system BIOS will only blank off the screen
Method
when disabling video.
V / H SYNC +
In addition to Blank Screen, BIOS will also turn
Blank
off the V-SYNC & H - SYNC signals from VGA
cards to monitor.
DPMS support
This function is enabled only for the VGA card
supporting DPMS.
#
"
MODEM Use IRQ
3, 4, 5, 7, 9
Special wake-up event for Modem.
10, 11
NA
This function is not applied.
#"
Soft-off by
Instant _off
The system will power off immediately once the
PWRBTN
power button is pressed.
""""""""""""
Delay 4 Sec
The system will not power off until the power
button has been pressed continuously for more
than 4 seconds.
#"
State after power
off
The system remains off when the AC power
failure
supply resumes.
on
The system will be powered up when the AC
power supply resumes.
""""""""""""""
Auto
Whatever the system status is, before the AC
power supply cuts off, the system remains in
the previous status(ON/OFF) when the AC
power supply resumes.
#"
Wake Up Events
Press Enter
set the following items.
#
"
USB Resume
Enabled
The system could be waken up by USB Device
from S3
from the Suspend to RAM status.
Disabled
The system cannot be waken up by USB Device
from the Suspend To RAM status.
Award BIOS Description
