Qcells Q.HOME CORE H5, Руководство по установке, Страница: 36 / 80

36
Battery Connection
11.2 Battery Power Connection
Amphenol PWL-03BFMA-TL7001 is used to connect the battery DC cable.
Note
■
The battery DC cable is not included in the package.
■
For information about the battery DC cable specification, see "6.2 Power Cable Specification" on page 25.
1 Assembling the Battery DC Cable
Disassemble the connector housing as follows:
Connector Sealing Body Sealing Nut
To assemble the battery DC cable:
WARNING
Steps from 2 to 5 must be observed.
If you don't follow the process properly, it may lead to fire.
1
Remove the screw from the sealing nut.
2
Strip the cable.
Max. 30 mm
7 to 9 mm
3
Insert the stripped cable into the sealing nut
and sealing body.
4
Insert wires to the connector.
Pin # Wire
1 BAT+
2 BAT−
3 PE
5
Secure the wires by using screws.
■
Torque: 4.5 kgf·cm
6
Connect the sealing body to the connector
and then connect the sealing nut to the
sealing body.