QCAMZ FULL HD, Руководство пользователя

Страница: 11 / 20

Taking a video
To take a video the camera must be set to video mode. To check unscrew the cap
located at the back of the camera
③
. The video/photo switch
④
must be set to the
right for the video recording standby mode, screw the cap back on tightly.
Press the Power/shutter button
②
to turn on the camera. Press the Power/shutter
button again once shortly to start video recording. The camera will beep and
vibrate one short time and the LED will flash red while the video is recording.
Press the Power/shutter button again to stop recording. The camera will beep
once and vibrate two short times and the red LED will stop flashing.
Take Snapshot Photos
Unscrew the cap from the back
③
, set the video/photo switch
④
to left for the
photo standby mode and screw the cap back on tightly. Press the Power/shutter
button to turn on the camera. Press the Power/shutter button
②
to start taking
photos.
The camera will beep and vibrate one short time and the LED will flash red. The
camera automatically takes a photo every 3 seconds until the battery is empty or
the Micro SD card full. Press the Power/shutter button again to stop the recording.
The camera will beep once and vibrate two short times and the red LED light will
stop flashing.