3
Minimum System Requirements
Windows 2000, XP, Vista, 7, 8, Mac OS X (mass storage class) Windows Media Player 9
Intel Pentium class computer
USB 2.0 port for hi-speed transfers and charging
Package Contents
Please unpack your intelligent security camcorder and check that the following were included:
Qcam QSD-481 intelligent security camcorder
5V DC Adapter
5V Car Adapter
USB 2.0 Cable
Quick Start Guide
NOTE: For video tutorials on your Spy Cam DVR and its widget please visit:
Charging
The camcorder comes with an internal rechargeable battery. When using the camcorder for the
first time, or if you are using it after a long period of non-usage, remember to fully charge the
battery for at least 4 hours and resync the time by using the widget (see section “
PC Software
Widget
”). You can charge your camcorder using the USB port of your computer, the DC adapter,
or using a car adapter.
To charge the battery through a USB port, connect the USB cable to the USB port of the
computer and the camera. For details, please see the status below. The camera will function as
a mass storage device. You will not be able to record video during this time.
To charge the battery through a DC adapter or car adapter, connect the DC adapter or car
adapter to the camcorder. For details, please see the
Status
section below. Moreover, you will
also be able to record video while charging, depending on the mode you set.
Recording
The power button is located on the right side of the camcorder. It can turn the camcorder on or
off.
Start Recording
