11
3.2 Hard Drive Installation
It is recommended to use a hard disk drive (HDD) of 7200rpm or higher.
Please follow the instructions below to install a hard disk drive (HDD).
All the figures listed below are for reference only. Slight differences may be found on the front or rear panel.
1. Loosen the screws of the
upper cover and side panel.
2. Attach four screws in the HDD
(Turn three times).
3. Place the HDD in accordance with
the four holes on the bottom.
4. Turn the device upside down
and then turn the screws in
firmly in the chassis.
5. Attach the HDD firmly.
6. Connect the HDD cable and
power cable.
7. Put the cover on in
accordance with the clip and
then place the upper cover
back on.
8. Secure the screws in the rear
panel and the side panel.
Note:
•
An HDD is included with the NVR by
default.
•
To connect the HDD, connect the
HDD data cable and the power cable
before attaching the HDD in the
device.
•
To remove the front cover, push the
clip first, and then slide the cover off.
Содержание NV3108E
Страница 1: ...1 Qcam NVR User Manual...
Страница 15: ...15...
Страница 53: ...53 8 Click the Start Preview button...