QCA Spas TheraSauna Classic Series, Руководство пользователя

Страница: 13 / 26

11
(12) CONNECT THE CONTROL WIRE OF THE CONTROL PANEL
Plug in roof to power pack:
•
Plug in the 4 back wall heaters to the control pack
•
Plug in the front wall heater to the control pack
•
Insert the Therma Couple through the holes in the blocks, shown circled in red
(13) CONNECTING THE RADIO
Installing the radio:
1. First, plug the Connector pin to the socket on the back of the radio (You can pull out by pressing
the top of the connector pin) and then the plug of the antenna.
2. Screw down the cover of the radio box.
Use the following pictures as reference to install your radio:
1 2 3 4
5 6 7 8
Operation of the Radio- See stereo owner’s manual packed separately with the stereo.
Control Panel Cord:
•
Located on back wall
•
Goes through the roof and plugs into
the system on the back