HC200 Conveyors | Installation & Maintenance Instructions
11
Belt Change
u
Removal of Existing Belt
2
x
1
Pull both pins from bearing
housing in tail assembly. (One
in each side)
2
Flip tail assembly into disen-
gaged position.
3
Remove pins in stand bracket
at angle brace on opposite
side of drive.
4
Flip angle brace down.
5
Pull pins out from sides of
flip-down stand brackets on
opposite side of drive.
6
Pull pins from stand brackets
at legs.
7
flip stand bracket down.
8
Slide belt off of conveyor.
