AS40-CD Conveyors | Installation & Maintenance Instructions
7
u
Mounting Angle Braces
1
Insert drop in nut into inner
stand leg t-slot.
2
Insert drop in nut into con-
veyor frame’s t-slot.
3
Align angle brace over drop
in nut in stand.
4
Insert socket head cap screw
through angle brace and into
drop in nut on stand (do not fully
tighten).
5
Slide up and align angle
brace with drop in nut in
frame.
6
Insert socket head cap screw
through angle brace and into
nut in conveyor frame.
7
Tighten socket head cap
screw on frame.
8
Tighten socket head cap
screw on stand.
9
Check with bubble level to
ensure conveyor is level.
>
Repeat for opposite side.
Injury is possible if the stands are not lagged to the floor, cross ties are not used, or angle braces are not present. Never place a conveyor in operation until all proper
mounts are installed and secured.
Warning:
Moving conveyors with casters can create dynamic forces that could tip the conveyor. Use caution when moving a conveyor with casters.
